Filter Your Results

More...

1995 Nissan Quest Ratings, Reviews and Analysis

Safety Ratings and Recalls

Safety

1995 Nissan Quest

Front Crash Driver Side
Front Crash Passenger Side

Recall Notices

1995 Nissan Quest (12/15/2000)

Campaign Number: 00V419001
Component Name: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
Manufacturer: Nissan North America, Inc.
Description: VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.
Defect: FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
Corrective Action: DEALERS WILL REPLACE THE VENT HOSE.

1995 Nissan Quest (8/17/1998)

Campaign Number: 96V253004
Component Name: EXTERIOR LIGHTING:TAIL LIGHTS
Manufacturer: Nissan North America, Inc.
Description: THE REAR LAMP SOCKET MAY NOT ILLUMINATE BECAUSE THE METAL CAN IN THE LAMP SOCKET MOVES OR SEPARATES FROM THE PLASTIC SOCKET HOUSING.
Defect: THIS CAN RESULT IN MALFUNCTION OF THE STOP OR REAR RUNNING LAMPS. CENTER HIGH MOUNT STOP LAMP FUNCTION IS UNAFFECTED. REAR LAMP MALFUNCTION CAN RESULT IN FOLLOWING DRIVERS NOT BEING ALERTED TO THE SUBJECT VEHICLE'S PRESENCE OR INTENDED ACTIONS, PARTICULARLY IN THE CASE IN WHICH BOTH LAMPS HAVE MALFUNCTIONED.
Corrective Action: DEALERS WILL INSTALL A REVISED REAR LAMP SOCKET AND WIRING ASSEMBLIES.

1995 Nissan Quest (6/4/1996)

Campaign Number: 96V089002
Component Name: SEATS
Manufacturer: Nissan North America, Inc.
Description: AN OUT-OF-SPECIFICATION CONDITION IN THE SEAT CABLE ROLLER PULLEY ASSEMBLY CAN ALLOW THE CABLE THAT CONNECTS THE SEAT ADJUST LEVER TO THE LATCH TO BE PINCHED IN THE ROLLER ASSEMBLY.
Defect: CONSEQUENCE OF NON-COMPLIANCE: THIS CONDITION CAN PREVENT THE LATCH ON THE LEFT SIDE FROM FULLY ENGAGING THE SEAT RAIL. THIS DOES NOT COMPLY WITH THE REQUIREMENT OF FMVSS NO. 207, "SEATING SYSTEMS."
Corrective Action: DEALERS WILL REPLACE THE PULLER ASSEMBLY IN THE THIRD ROW SLIDING BENCH SEAT LATCH ASSEMBLY.